Go to homepage
€0.00*
Categories

PrintaClean 250ml

€5.49*

Content: 250 Mililiter

incl. Tax plus shipping costs

Available, delivery time: 1-3 days

Remove residue and clean your build plate with ease PrintaClean is a powerful solvent to remove dust, dirt and adhesive residue from the 3D printer build plate.

Instruction

Remove the build plate from the 3D printer. The build plate should be at room temperature and without damages. Spray a generous amount of PrintaClean on the build plate. Allow the solution around 30 seconds to disolve any residue Wipe off the solution with a kitchen towel.

Labeling according to Regulation Nr. 1272/2008 (CLP)
Signal Word: Danger
UN Number: 1170
UFI: WA85-10TJ-A003-0JAH
GHS02 GHS07
Hazard Statements
  • H225 - Highly flammable liquid and vapour
  • H319 - Causes serious eye irritation
  • Keep out of reach of children; Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. no smoking; Wear protective gloves/protective clothing/eye protection/face protection; If on skin (or hair): take off immediately all contaminated clothing. rinse skin with water or shower; If in eyes: rinse cautiously with water for several minutes. remove contact lenses, if present and easy to do. continue rinsing; Store in a well-ventilated place. keep cool; Dispose of contents/container in accordance with local/regional/national/international regulations
Europa
North America
Technical Data
Density: 0,88 g/cm³ (25°C)
VOC Content: 60 %
Supplemental information
Tariff Code: 3824 9996
Country of Origin: Austria
Product weight: 0.245 kg
Shelf Life (Months): 12
Packaging Dimensions: 49 x 49 x 173 mm
Shipping Restrictions: Not Restricted
SKU: 1902
EAN Code: 9120078080153

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

This website uses cookies to ensure the best experience possible. More information...